Alpine PXA-H800
Τιμή : 680 €
Οι εκτενείς δυνατότητες επεξεργασίας ήχου του PXA-H800 θα μεγιστοποιήσουν τον ήχο από οποιοδήποτε σύστημα, είτε πρόκειται για σύστημα εξ ολοκλήρου από την Alpine είτε για άλλη μάρκα.
Επαγγελματική ποιότητα ήχου
Το PXA-H800 παρέχει όλες τις λειτουργίες επεξεργασίας ήχου που είναι απαραίτητες για την ενεργοποίηση του συστήματος, ώστε να επιτευχθούν τα υψηλότερα δυνατά επίπεδα ποιότητας ήχου.
Ανώτερη εμπειρία πολυμέσων από φορητές συσκευές
Με το PXA-H800, μπορείτε να απολαμβάνετε πραγματική εμπειρία ήχου 5.1 καναλιών, ανάλογη ενός συστήματος home cinema.
Αναβάθμιση εργοστασιακού συστήματος
Για όσους θέλουν να διατηρήσουν την εργοστασιακή κεντρική μονάδα, το PXA-H800 είναι ένας εξαιρετικός τρόπος για την αναβάθμιση του συστήματος με περισσότερες πηγές και καλύτερη ποιότητα ήχου.
Πρόσθετες δυνατότητες συντονισμού ήχου
Δείχνοντας την απαράμιλλη δέσμευσή της στην άριστη αναπαραγωγή ήχου από φορητές συσκευές, η Alpine εξόπλισε το PXA-H800 με ακόμα περισσότερες τεχνολογίες, συμπεριλαμβανομένης της δυνατότητας προγματοποιησης μικρορυθμίσεων από υπολογιστή.
Τεχνικά Χαρακτηριστικά
Ρύθμιση ήχου
- Γραφικός ισοσταθμιστης : 31 περιοχών (μπροστά, πίσω, κέντρο), 10 περιοχών (subwoofer)
- Παραμετρικός ισοσταθμιστης : 10 περιοχών (μπροστά, πίσω, κέντρο), 5 περιοχών (subwoofer)
- Προσαρμογή crossover (highpass, lowpass, bandpass)
- Χρονική διόρθωση 8 καναλιών
- ImprintEQ με 3 προρυθμίσεις και απόλυτα προσαρμοσμένες κυρτώσεις
- RoadEQ
- Αυτόματη χρονική διόρθωση (Auto TCR)
- Dolby Digital
- Dolby Pro Logic II
- dts ψηφιακός ήχος Surround
- Λειτουργία Bi-Phantom
- MediaXpander Plus
- Euphony
- Ρύθμιση AUX IN Gain
- Ρύθμιση επίπεδου απόδοσης AUX
- Ρύθμιση επίπεδου πλοήγησης Voice Mix
ΓΕΝΙΚΑ
- Σύνδεση Ai-NET
- Αριθμός καναλιών εισόδου: 6 (αναλογικά - RCA η επίπεδο ηχείου), 2 (οπτικά ψηφιακά), 2 (Ai-NET)
- Τύπος αναλογικής εισόδου : RCA (ανταπτορας σύνδεσης γραμμής ηχείου)
- Τύπος ψηφιακής εισόδου:TOSLINK
- Είσοδος φωνητικής καθοδήγησης πλοηγού: είσοδος RCA για σύνδεση τροφοδοτικού
- Αριθμός καναλιών εξόδου: 8 (έξοδος RCA)
- 24-bit Ultra υψηλών επιδόσεων DAC
- 24-bit ADC
- Twin 32-bit Floating-point Processing DSP
- Εξαιρετικό χαμηλό κύκλωμα διαχείρισης Jitter
- Προέξοδος 4V
- Κύκλωμα S.T.A.R.
- Υιοθετήθηκε υψηλής ποιότητας εξάρτημα ήχου
- Επίχρυσοι ακροδέκτες
- Δυνατότητα ελέγχου μεσώ Η/Υ για την ορθή λειτουργία συντονισμού (λογισμικού προεγκατεστημένο)
- Περιέχεται μικρόφωνο
- Περιέχεται καλώδιο USB
- Περιέχεται καλώδιο σύνδεσης Ai-NET (5.5m)
Συντονισμός ήχου
- Αριθμός περιοχών γραφικού equalizer: 31 περιοχών (μπροστά, πίσω, κέντρο), 10 περιοχών (Subwoofer)
- Ρύθμιση επίπεδου γραφικού equalizer: ±12 dB (0.5dB step)
- Αριθμός περιοχών παραμετρικού Equalizer: 10 περιοχών (μπροστά, πίσω, κέντρο), 5 περιοχές (Subwoofer)
- Συχνότητα παραμετρικού equalizer: 20/22/25/28/31.5/36/40/45/50/56/63/71/80/90/100/110/125/140/160/180/200/220/250/280/315/360/400/450/500/560/630/710/800/900/1k/1.1k/1.2k/1.4k/1.6k/1.8k/2k/2.2k/2.5k/2.8k/3.2k/3.6k/4k/4.5k/5k/5.6k/6.3k/7.1k/8k/9k/10k/11k/12.5k/14k/16k/18k/20kHz (μπροστά, πίσω, κέντρο)
- Συχνότητα παραμετρικού equalizer: 20/22/25/28/31.5/36/40/45/50/56/63/71/80/90/100/110/125/140/160/180/200Hz (Subwoofer)
- Ρύθμιση επιπέδου παραμετρικού equalizer: ±12 dB (0.5dB step)
- QFactor: 0.5; 1; 1.5; 2; 2.5; 3; 4; 5
- Χρονικη διορθωση : 0 εως 20ms (0.05ms step)
- Συχνότητα Crossover: 60 step (0 εως -36 dB/oct.)
ΔΙΑΣΤΑΣΕΙΣ
- Μέγεθος σκελετού (W x H x D): 169 x 50.8 x 215 mm
ΓΕΝΙΚΑ
- Απαιτούμενη ενέργεια: 14.4 (11-16) V.DC
- Απόκριση συχνότητας: 20Hz - 20kHz
- Αναλογία σήματος προς θόρυβο (αναλογική είσοδος RCA): >103dB (IHF-A)
- Αναλογία σήματος προς θόρυβο (ψηφιακή είσοδος): >110dB (IHF-A)
- Διαχωρισμός καναλιών: 90dB
- Ευαισθησία εισόδου (Είσοδος RCA): 2V
- Ευαισθησία εισόδου (Επίπεδο εισόδου ηχείου): 7V
- Rated Output: 4V (με 10k ohms φορτωμένο)
- Συντελεστής παραμόρφωσης : 0.01%
- Αντίσταση εισόδου : 10k ohms ή υψηλότερο
- Αντίσταση εξόδου : 1k ohms ή λιγότερο
- Θερμοκρασία λειτουργίας : -20°C to +60°C
- Βάρος : 1.35kg
|
|
Alpine RUX-C800
Τιμή : 220 €
Το RUX-C800 παρέχει πλήρη έλεγχο των λειτουργιών του PXA-H800 και ενδείξεις με αναλυτικές πληροφορίες.
Τεχνικά Χαρακτηριστικά
Γενικά
- Μονάδα έλεγχου για το PXA-H800
- Περιλαμβάνει κιτ εγκατάστασης
- Οθόνη BioLite
- Διπλός φωτισμός : μπλε/κόκκινο
Διαστάσεις
- Μέγεθος (WxHxD): 161 x 40 x 28mm
Γενικά
|
|
Alpine KTX-H100
Τιμή : 30 €
Kit βαθμονόμησης ήχου
Περιλαμβάνει CD-ROM, μικρόφωνο υψηλής ποιότητας, black-box και καλώδια. Για βαθμονόμηση IMPRINT του PXA-H100
Λειτουργεί σε περιβάλλον Windows XP
|
|
Alpine PXA-H100
Τιμή : 150 €
IMPRINT Επεξεργαστής ήχου
ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ
- Απολαύστε απόλυτο ήχο IMPRINT
- Οι νέες εκπληκτικές τεχνολογίες ήχου IMPRINT της Alpine έχουν ξεπεράσει όλα τα ακουστικά προβλήματα στο εσωτερικό του αυτοκινήτου δίνοντάς σας τη δυνατότητα να απολαμβάνετε τη μουσική ακριβώς όπως θα ήθελε ο καλλιτέχνης
- Το εσωτερικό του αυτοκινήτου περιέχει υλικά τα οποία καταστρέφουν τον ήχο. Τα παράθυρα επιδρούν στις μεγάλες συχνότητες. Τα καθίσματα και το ταμπλό αλλάζουν τις κεντρικές συχνότητες. Τα χαλάκια απορροφούν τις μεσαίες συχνότητες. Αυτά τα προβλήματα είναι δύσκολο να λυθούν με απλή εξισορρόπηση. Επίσης, καθώς τα ηχεία είναι τοποθετημένα σε διαφορετικές αποστάσεις από τους ακροατές ,η ηχητική του αυτοκινήτου είναι ασύμμετρη
- Πίσω από την πρωτοποριακή λειτουργία επεξεργασίας ήχου IMPRINT κρύβεται μια άλλη τεχνολογία η MultEQ. Αναλύει τα ακουστικά χαρακτηριστικά του αυτοκινήτου σας και έπειτα δημιουργεί φίλτρα εξισορρόπησης για να διορθώσει την απόκριση συχνότητας καθώς και τα προβλήματα καθυστέρησης για κάθε ηχείο του αυτοκινήτου σας. Η λειτουργία MultEQ επεξεργάζεται περισσότερες από 500 συχνότητες διορθώνοντας τον ήχο με απόλυτη ακρίβεια. Το αποτέλεσμα είναι οι ακροατές να απολαμβάνουν τον ήχο με απόλυτο καθαρότητα
- Μετατροπέας 24-Bit D/A-Converter
- 3 Έξοδοι προενίσχυσης (4 Volts)
- Ρύθμιση Ήχου με MediaXpander: 5 πηγές, 3 επίπεδα η καθεμία
- Χρονική Διόρθωση: 6 κανάλια
- Παραμετρικό Equalizer: 5 band
- Γραφικό Equalizer: 7 band
- Εργοστασιακό EQ: 10 presets
- Crossover: 2/3 κανάλια
- Δυνατότητα MultEQ IMPRINT
- Διαστάσεις (W x H x D): 110 x 25 x 85 mm
- Βάρος: 345g
|
|
Audison bit Ten
Τιμή : 247 €
bit Ten is a multi-function digital processor featuring analog input, capable of transforming ordinary OEM or after-market system into a high-performance system.
Provided with a 32 bit, 147 MHz clock speed DSP as well as 24 bit A/D and D/A converters, bit Ten is controlled by a software especially developed for signal treatment according to the vehicle acoustic peculiarities.
Setting the parameters of each input single channel, setting the delays according to the listening position, adjusting crossovers and equalizers for each of the 5 output channels; all of these operations can be managed by the PC.
During the installation phase, after converting the analog signal into digital, bit Ten automatically reconstructs a digital full-bandwidth stereo signal; de-equalizes the frequency response and, if necessary, reconstructs the central and subwoofer channels.
The user can configure the output mode of each channel relative to the installed system.
It is designed to be connected with the DRC, Digital Remote Control (optional).
Manuals: bit Ten Manual, bit Ten Tech Sheet, bit Accessories |
|
Audison bit Ten D
Τιμή : 387 €
bit Ten D is a multi-function digital processor conceived and built to process digital and analogue signal both on the input and on output to the amplifier (featuring AD Link connection) and create top-performance system with any source typology.
Provided with a 32 bit, 147 MHz clock speed DSP as well as 24 bit A/D and D/A converters, bit Ten D processes the signal with extreme accuracy and wide configurability thanks to a software especially designed for car acoustic peculiarities.
bit Ten D features an optical digital input, minimizing interference and degradations of the signal found in traditional analog interconnects, also by-passing the A/D conversion phases of analog signals.
Thanks to the AD Link connection, the available outputs become 8 in total, all in digital format; they can also be used simultaneously with the analog ones (for a maximum of 8 outputs total).
The AC Link is completely dedicated to the “remote control” of the system. The system is comprised of one connector for the provided DRC and one for the amplifiers present in the system. The DRC is supplied with the bit Ten D product.
Manuals: bit Ten D Manual, bit Ten D Tech Sheet, bit Accessories |
|
Audison bit One
Τιμή : 485 €
Despite its compact size, the bit One is equipped with a fast, latest generation 266 MHz / 32 bit floating point DSP microprocessor, working in real time on all the functions of the most complete systems. Managed and configured by a simple and intuitive computer software, it is possible to make adjustments to improve the signal through each phase of its path; from input to output. Eight input channels for four different signal typologies (amplified, pre-amplified, coaxial electric and TOSLINK optical digital) and six different sources managed through a remote control, making the bit One a unique interface suitable for any need. Eight analog and/or digital output channels ensure vastexpandability for any audio system configuration.
Manuals: bit One Manual, bit One Tech Sheet, bit Accessories
DRC–Digital Remote Control - INCLUDED
DRC is the digital interface between the bit processors and the user.
DRC mounted in the vehicle dashboard with bit Ten D processor, provides:
- ability to select between main, aux and optical inputs
- control of master volume, subwoofer volume, balance and fader
- ability to choose between 2 user-defined memory presets for equalizer, crossover and time alignment settings.
- control of the Audison Thesis amplifiers’ system when these are installed in the same system.
|
|
Audison DRC MP
Τιμή : 139 €
DRC MP - Digital Remote Control Multimedia Play - OPTIONAL
The new Audison DRC MP (Digital Remote Control Multimedia Play) is compatible with all the Audison electronics featuring AC Link bus. Its slim profile along with the holder supplied with it eases the installation in the best position inside the car. Thanks to the new Joystick, “Rubber Touch” finished for best control of the movements along the four direction axes, the 'DRC Settings' menu can be adjusted and navigation is also possible through the 'Navy Command' function if the system features an Audison bit Play HD with video output connected to a monitor.
|
|
HELIX DSP
Τιμή : 449 €
The first stand-alone DSP that deserves to be called a HELIX. The new HELIX DSP is more than convincing proof that noisy, distorting sound processors are finally a thing of the past. Excellent technical specs are combined with a feature package that could hardly be more impressive in actual practice. Intuitive operation thanks to a clearly structured graphical PC interface enables any ambitious sound freak to optimize the sound virtually any which way.
- Powerful "fixed point" Audio DSP with 56 Bit resolution
- Freely configurable inputs and outputs with flexible signal summing options
- Paragraphic 30-band EQ per channel with ultra-precise 0.25 dB steps
- Time-alignment adjustment in narrow 7 mm steps and phase control in 11.25° steps
- Various high- and lowpass filter characteristics with 6 - 30 dB slope available
- Different signal routing matrices for each signal input section including configurable signal detections
- “Ground lift” switch to avoid ground loops
- Control input for connecting remote controls and accessories
- Easy configuration thanks to the professional and user-friendly DSP PC-Tool Version 3 software
Power Save Mode
The Power Save Mode is incorporated in the basic setup. It allows to significantly reduce the power consumption of the amplifiers that are connected to the HELIX DSP once there’s no input signal present for more than 60 seconds. Please note that in many up-to-date cars with “CAN” or any other internal bus structures it may happen that the radio remains “invisibly” turned on for up to 45 min. even after leaving the car! Once the “Power Save Mode is active the “Remote Output” and therefore the connected amplifiers will be turned off. The HELIX DSP will reactivate the “Remote Output” within a second if a music signal is applied. It is possible to either modify the turn-off time of 60 sec. or completely deactivate the “Power Save made” via theDSP PC-Tool software.
Start-Stop capability
The switched power supply of the HELIX DSP assures a constant internal supply voltage even if the battery’s voltage drops to 6 Volts during engine crank.
Automatic Digital Signal Detection
Switching from analog input to the digital input is done automatically as soon as an signal is detected on the optical input. This feature can be deactivated in the DSP PC-Tool software. Alternatively you can use the optional cable remote control URC 2A for manual switching between analog and digital inputs.
Specifications:
Inputs
6 x RCA/Cinch
4 x Highlevel speaker input
1 x Optical SPDIF-Format (6-96 kHz Sampling Rate)
1 x Remote In
Input sensitivityRCA/Cinch 4 Volts (internally adjustable) - default 4 Volts
Highlevel 5 - 11 Volts (intern. adjustable) - default 11 Volts
(corresponds to 6 - 30 Watts RMS - not max. power)
Outputs
8 x RCA/Cinch
1 x Remote Out
Output voltage
Max. 4 Volts RMS
Frequency response
10 Hz - 22,000 Hz
DSP resolution
56 Bit
DSP processing power
172 MHz
Total harmonic distortion (THD+N) - digital input < 0.001 %
Total harmonic distortion (THD+N) - analog input < 0.003 %
IM distortion (IMD) - digital input < 0.003 %
IM distortion (IMD) - analog input < 0.007 %
|
|
HELIX DSP PRO
Τιμή : 749 €
Digital high-end 10-channel signal processor with 96 kHz / 24 Bit signal path
The signal processor for all those, who are only satisfied with the best! The new HELIX DSP PRO raises the bar to a new level, not only in terms of sound quality. Due to the implementation of the latest generation of ultra-fast Audio DSPs with enormous 64 Bit resolution, this device provides more calculating power than every other signal processor available on the market today. In addition, it is the first of its kind which performs the full signal path with a sampling rate of 96 kHz, resulting in an extended audio bandwidth up to more than 40 kHz.
As if that were not enough - the new HELIX Extension Card Slot, simply called "HEC", makes this device extremely flexible and versatile. It allows, by using optional HEC modules, to extend the functionality of the DSP PRO - for example by a Bluetooth® audio streaming module, an additional optical digital input or an optical digital output.
Entirely new, but still familiar is the completely revised DSP PC-Tool software 3. As intuitive as before, it adds a bunch of new functions and more precise adjustments of all parameters. The real-time analyzer, which is integrated in the software, now comprises the revolutionary "AutoSet" function that makes the equalizer adjustment as easy as possible.
No doubt - the HELIX DSP PRO will make the dreams come true - even of the most ambitious sound enthusiasts - that´s a safe bet!
- Cutting-edge, extremely powerful "fixed point" Audio DSP with 64 Bit resolution
- 96 kHz Sampling rate - full audio bandwidth up to more than 40 kHz for unparalleled audio performance
- Parametric 30-band EQ per channel with ultra-precise 0.25 dB steps
- Time-alignment adjustment in accurate 3.5 mm steps
- Various high- and lowpass filter characteristics with 6 - 42 dB slope available
- Different signal routing matrices for each signal input section including configurable signal detections
- HELIX Extension Card slot (HEC) for additional input / output modules like Bluetooth® Audio Streaming
- "Ground lift" switch to avoid ground loops
- Control input for connecting remote controls and accessories
- Easy configuration thanks to the professional and user-friendly DSP PC-Tool Version 3 software
- Inputs: 8 x RCA/Cinch (2 – 4 Volts, 2 channels internally changeable to higher sensitivity 250 – 500 mV), 8 x highlevel (5 – 10 Volts or 10 – 20 Volts), 1 x SPDIF (optical / coaxial switchable), remote input, USB connector
- Outputs: 10 x RCA/Cinch (max. 6 Volts output voltage) and remote output
Special features:
96 kHz sampling rate
The HELIX DSP PRO allows to handle all signal management with the doubled sampling rate of 96 kHz. Thus the audio bandwidth is no longer limited to usual values like 22 kHz but allows an extended frequency response to more than 40 kHz. Doubling the sampling rate requires significantly higher DSP power as the number of possible arithmetic operations is halved. Only the implementation of the latest DSP chip generation allows raising the sampling rate to 96 kHz and adding new features plus additional channels at the same time.
Power Save Mode
The Power Save Mode is incorporated in the basic setup. It allows to significantly reduce the power consumption of the amplifiers that are connected to the HELIX DSP PRO once there’s no input signal present for more than 60 seconds. Please note that in many up-to-date cars with “CAN” or any other internal bus structures it may happen that the radio remains “invisibly” turned on for up to 45 min. even after leaving the car! Once the “Power Save Mode“ is active the Remote Output and therefore the connected amplifiers will be turned off. The HELIX DSP PRO will reactivate the Remote Output within a second if a music signal is applied. It is possible to either modify the turn-off time of 60 sec. or completely deactivate the “Power Save Mode” via the DSP PC-Tool software.
Start-Stop capability
The switched power supply of the HELIX DSP PRO assures a constant internal supply voltage even if the battery’s voltage drops to 6 Volts during engine crank.
Automatic Digital Signal Detection
Switching from analog input to the digital input is done automatically as soon as a signal is detected on the optical input. This feature can be deactivated in the DSP PC-Tool software. Alternatively you can use an optional remote control for manual switching between analog and digital inputs.
Specifications:
Inputs
8 x RCA / Cinch
8 x Highlevel speaker input
1 x Optical SPDIF (12 – 96 kHz)
1 x Coax SPDIF (12 - 192 kHz)
1 x Remote In
Input sensitivityRCA / Cinch 2 - 4 Volts
Highlevel 5 - 10 Volts or 10 - 20 Volts
Outputs
10 x RCA / Cinch
1 x Remote Out
Output voltage
6 Volts RMS
Frequency response
10 - 44,000 Hz
DSP resolution
64 Bit
DSP power
295 MHz
1.2 billion MAC operations per secon
Distortion (THD+N)
< 0.0006% (digital input)
< 0.001% (analog input)
|
|
GLADEN DSP 4to6
Τιμή : 339 €
Stand Alone Processor
The Digital Signal Processor with 4 inputs and 6 outputs.
GLADEN DSP 4to6
Highest resolution, e.g. time delay in 0,02 msec/step, Q in steps of 0.001
Parametric and Graphic EQ with up to 30 (para-graphical) bands per channel pair
All settings in real-time
USB and BT adapter (MOS-BTM), for adjusting by PC and Android smart phone apps
Low-level or High-level input with auto-sense (only by High-Level)
Aux input with auto-sense for stereo signal
Hands-free and mobile navigation
4 presets
Mixer matrix to realize all possible mixtures and couple input and output channels as desired
Intuitive User Interface and video tutorials to avoid an instruction book.
Operating also without mouse, only with keys for an easy adjusting in the car
DSP Technology made by cooperation MOSCONI-GLADEN
Designed and made by MOSCONI, Italy
Technical Specifications:
- INPUT MODE: Low Level (LL) / High Level (HL)
- INPUT IMPEDANCE: > 10Kohm (LL) / 47ohm (HL)
- INPUT SENSITIVITY: 2Vrms ÷ 8Vrms (LL) / 5Vrms ÷ 20Vrms (HL)
- INPUT VOLTAGE REGULATION: -12dB ÷ 0dB
- MAX OUTPUT SIGNAL: 4Vrms
- OUTPUT IMPEDANCE: 50 ohm
- THD DISTORTION:
- FREQUENCY RESPONSE: 20Hz ÷ 20KHz (within -0.1dB)
- CHANNEL SEPARATION: >75dB (@ 1KHz)
- SUPPLY VOLTAGE: 11V ÷ 15V
- CURRENT CONSUMPTION: 0.5A @ 12V
- GROUND ISOLATION vs CAR BODY: 1Kohm
- AUTOSENSE: two operative modes (yes, HL only)
- REMOTE OUTPUT: 130mA max.
- COMMUNICATION PERIPHERALS: on-board USB, Bluetooth socket, Remote controller
- SIZE: 150 x 125 x 40 mm (including fixing feet)
|
|
GLADEN DSP 4to6 SP-DIF
Τιμή : 389 €
Stand Alone Processor
The Digital Signal Processor with 4 inputs and 6 outputs.
Available as DSP 4to6 and DSP 4to6 SP-DIF
GLADEN DSP 4to6
Highest resolution, e.g. time delay in 0,02 msec/step, Q in steps of 0.001
Parametric and Graphic EQ with up to 30 (para-graphical) bands per channel pair
All settings in real-time
USB and BT adapter (MOS-BTM), for adjusting by PC and Android smart phone apps
Low-level or High-level input with auto-sense (only by High-Level)
Aux input with auto-sense for stereo signal
Hands-free and mobile navigation
4 presets
Mixer matrix to realize all possible mixtures and couple input and output channels as desired
Intuitive User Interface and video tutorials to avoid an instruction book.
Operating also without mouse, only with keys for an easy adjusting in the car
DSP Technology made by cooperation MOSCONI-GLADEN
Designed and made by MOSCONI, Italy
GLADEN DSP 4to6 SP-DIF
Like a DSP 4to6 but with digital input output
Digital inputs optical and coaxial SP-Dif
SP-Dif output (optical) with volume-regulated signal from channel 1+2.
Note: with the digital master/slave possibility you can create a 12, 16, 24, 32…channel DSP! (Digital out and then digital in)
Technical Specifications:
- INPUT MODE: Low Level (LL) / High Level (HL)
- INPUT IMPEDANCE: > 10Kohm (LL) / 47ohm (HL)
- INPUT SENSITIVITY: 2Vrms ÷ 8Vrms (LL) / 5Vrms ÷ 20Vrms (HL)
- INPUT VOLTAGE REGULATION: -12dB ÷ 0dB
- MAX OUTPUT SIGNAL: 4Vrms
- OUTPUT IMPEDANCE: 50 ohm
- THD DISTORTION:
- FREQUENCY RESPONSE: 20Hz ÷ 20KHz (within -0.1dB)
- CHANNEL SEPARATION: >75dB (@ 1KHz)
- SUPPLY VOLTAGE: 11V ÷ 15V
- CURRENT CONSUMPTION: 0.5A @ 12V
- GROUND ISOLATION vs CAR BODY: 1Kohm
- AUTOSENSE: two operative modes (yes, HL only)
- REMOTE OUTPUT: 130mA max.
- COMMUNICATION PERIPHERALS: on-board USB, Bluetooth socket, Remote controller
- SIZE: 150 x 125 x 40 mm (including fixing feet)
|
| |
| |
| |
| |
DSP Signal Processors
