DSP Signal Processors
Audison SR4Τιμή : 265 €
SR 4 is a DYNAB four-channel amplifier, perfect for driving Front/Rear, Front/Sub or as part of a multi-channel system, with independent, fully configurable, by-passable crossover sections. Specifications: Power Output (Rms)
|
||||||||||||||||||||||||||
Audison AP4 DΤιμή : 299 €
The AP4 D amplifier was designed as an extension for the AP 4.9 bit and AP 5.9 bit amplifiers, offering 4 additional 70 W amplified channels. Specifications: Power Output (Rms)
|
||||||||||||||||||||||||||
Audison AP4.9 bitΤιμή : 499 € |
| Load Imp. | 4 Channels | 2 Channels (bridge) |
| 4 Ohm | 70 W x 4 | 260 W x 2 |
| 2 Ohm | 130 W x 4 |
Audison AV quattro
Τιμή : 798 €
AV quattro is a four-channel amplifier which can work in four, three, two channel mode, delivering 1700 W (RMS) power total.
It is designed to handle complex configurations as front/rear and multi-channel systems. AMP (Amplifier Management Processor) constantly checks the operating status system and communicates with the user through 4 different coloured LEDs, located on the top panel; ART (Automatic Remote Turn On-Off) allows automatic turn-on/off when a remote signal isn’t available from the source; up to 24 dB/Oct. slope crossovers allow to build front-rear, front-sub or multi-amplified systems while still ensuring a non-filtered output signal to expand the system.
Specifications:
Power Output (Rms)
| Load Imp. | 4 Channels | 3 Channels | 2 Channels |
| 4 Ohm | 120 W x 4 | 120 W x 2 + 400 W x 1 | 400 W x 2 |
| 4/2 Ohm | 120 W x 2 + 200 W x 2 | - | - |
| 2/4 Ohm | - | 200 W x 2 + 400 W x 1 | - |
| 2 Ohm | 200 W x 4 | - |
Audison TH quattro
Τιμή : 2800 €
The Thesis TH amplifiers are manufactured using state-of-the-art analog and digital technology. Class A amplification stage, multi-standard analog and digital inputs and the control of the amplifier through a microprocessor make this product the most evolved among the Audison range.
TH quattro is a multi-channel amplifier fully configurable by the microprocessor. The four-channel configuration enables universal use of this amplifier for no-limit quality and functionality.
Power Output (Rms)
| Dual Power - Hi-Current | Load Imp. | Stereo |
| 4 Ohm | 160 W x 4 150 W x 2 + 540 W x 1 500 W x 2 |
|
| 2 Ohm | 260 W x 4 250 W x 2 + 650 W x 1 700 W x 2 |
|
| 1 Ohm | 340 W x 4 | |
| Dual Power - A Class | Load Imp. | Stereo |
| 4 Ohm | 55 W x 4 |
Hertz HDP 4
Τιμή : 346 €
HDP 4 D CLASS FOUR-CHANNEL AMPLIFIER
HDP 4 is a D-Class four-channel car audio amplifiers, perfect to satisfy any need.
It is the most compact HDP; nonetheless, like the other models, it can reach very high power levels: in less than 30 cm (12 inches) it can provide up to 1000W on 2 channels at 4 Ohm! It can be used in full range as well as with crossover settable as Lo-Pass/Hi-Pass.
It has been thought to offer the user the maximum possible flexibility, both thanks to Speaker In and RCA inputs and to the controls, with a status monitor communicating to the user through a LEDs system. Using Speaker In inputs, the ART™ ( Automatic Remote Turn On-Off) function is available; the user can also switch it off. HDP 4 is the perfect choice for those who look for performance and non-bulky sizes. The double-extrusion heat sink and the Hertz logo, which is back lit and can be rotated, allow especially sophisticated installations.
Specifications:
Power Output (Rms)
| Load Imp. | 4 Channels | 3 Channels | 2 Channels |
| 4 Ohm | 150 W x 4 | 150 W x 2 + 500 W x 1 | 500 W x 2 |
| 2 Ohm | 250 W x 4 | 250 W x 2 + 500 W x 1 | - |
Data table
| Channel mode | 4-3-2 |
| Output Power (RMS) @ 14.4 VDC |
4 Ch 150 W x 4 (4Ω) 4 Ch 250 W x 4 (2Ω) 3 Ch 150 W x 2 (4Ω) + 500 W x 1 (4Ω) 3 Ch 250 W x 2 (2Ω) + 500 W x 1 (4Ω) 2 Ch 500 W x 2 (4Ω) |
| Filters Hi-Pass Lo-Pass |
50 ÷ 5k Hz (2 range) @ 12 dB/Oct. 80 ÷ 3.3k Hz @ 12 dB/Oct. |
| Distortion - THD (100Hz @ 4Ω) |
0.08 % |
| S/N Ratio (A weighted @ 1V) |
100 dB |
| Damping factor (100Hz @ 4Ω) |
50 |
| Size W x D x H mm (in.) |
171 x 284 x 46.70 (6.73 x 11.18 x 1.83) |
HDP 4
D CLASS FOUR-CHANNEL AMPLIFIER
HDP 4 is a D-Class four-channel car audio amplifiers, perfect to satisfy any need. It is the most compact HDP; nonetheless, like the other models, it can reach very high power levels: in less than 30 cm (12 inches) it can provide up to 1000W on 2 channels at 4 Ohm! It can be used in full range as well as with crossover settable as Lo-Pass/Hi-Pass.
It has been thought to offer the user the maximum possible flexibility, both thanks to Speaker In and RCA inputs and to the controls, with a status monitor communicating to the user through a LEDs system. Using Speaker In inputs, the ART™ ( Automatic Remote Turn On-Off) function is available; the user can also switch it off.
HDP 4 is the perfect choice for those who look for performance and non-bulky sizes.
The double-extrusion heat sink and the Hertz logo, which is back lit and can be rotated, allow especially sophisticated installations.
D CLASS FOUR-CHANNEL AMPLIFIER
HDP 4 is a D-Class four-channel car audio amplifiers, perfect to satisfy any need. It is the most compact HDP; nonetheless, like the other models, it can reach very high power levels: in less than 30 cm (12 inches) it can provide up to 1000W on 2 channels at 4 Ohm! It can be used in full range as well as with crossover settable as Lo-Pass/Hi-Pass.
It has been thought to offer the user the maximum possible flexibility, both thanks to Speaker In and RCA inputs and to the controls, with a status monitor communicating to the user through a LEDs system. Using Speaker In inputs, the ART™ ( Automatic Remote Turn On-Off) function is available; the user can also switch it off.
HDP 4 is the perfect choice for those who look for performance and non-bulky sizes.
The double-extrusion heat sink and the Hertz logo, which is back lit and can be rotated, allow especially sophisticated installations.
D CLASS FOUR-CHANNEL AMPLIFIER
HDP 4 is a D-Class four-channel car audio amplifiers, perfect to satisfy any need. It is the most compact HDP; nonetheless, like the other models, it can reach very high power levels: in less than 30 cm (12 inches) it can provide up to 1000W on 2 channels at 4 Ohm! It can be used in full range as well as with crossover settable as Lo-Pass/Hi-Pass.
It has been thought to offer the user the maximum possible flexibility, both thanks to Speaker In and RCA inputs and to the controls, with a status monitor communicating to the user through a LEDs system. Using Speaker In inputs, the ART™ ( Automatic Remote Turn On-Off) function is available; the user can also switch it off.
HDP 4 is the perfect choice for those who look for performance and non-bulky sizes.
The double-extrusion heat sink and the Hertz logo, which is back lit and can be rotated, allow especially sophisticated installations.
Hertz HCP 4
Τιμή : 197 €
HCP 4 is a four channels car audio amplifier designed to reproduce any musical genres with four separate channels for multiple configurations. Pre-amplified (Pre-In) inputs and high-level (Speaker-In) inputs allow for connection with any head units. Built to work both in mono, as part of a three-channel system with sub and front, and in stereo for a powerful two-channel system, HCP 4 is a unique model in terms of versatility! All the Hertz Compact Power amplifiers are assembled with high-quality components and feature a complete and by-passable crossover system. The dissipation system is optimized with the heat being transferred to the heat sink and then dissipated through the sides of the amplifier.
Specifications:
Power Output (Rms)
| Load Imp. | 4 Channels | 3 Channels | 2 Channels |
| 4 Ohm | 65 W x 4 | 65 W x 2 + 190W x 1 | 190 W x 2 |
| 2 Ohm | 95 W x 4 | 95 W x 2 + 190 W x 1(4ohm) | - |
Hertz HCP 4D
Τιμή : 268 €
HCP 4 is a four channels car audio amplifier designed to reproduce any musical genres with four separate channels for multiple configurations. Pre-amplified (Pre-In) inputs and high-level (Speaker-In) inputs allow for connection with any head units. Built to work both in mono, as part of a three-channel system with sub and front, and in stereo for a powerful two-channel system, HCP 4 is a unique model in terms of versatility! All the Hertz Compact Power amplifiers are assembled with high-quality components and feature a complete and by-passable crossover system. The dissipation system is optimized with the heat being transferred to the heat sink and then dissipated through the sides of the amplifier.
Specifications:
Power Output (Rms)
| Load Imp. | 4 Channels | 3 Channels | 2 Channels |
| 4 Ohm | 85 W x 4 | 85 W x 2 + 290W x 1 | 290 W x 2 |
| 2 Ohm | 145 W x 4 | 145 W x 2 + 290 W x 1(4ohm) | - |