Mosconi

Quality Car audio products

Audison-Hertz-Full/DA

High End In-Car Audio Systems!!!

MTX Audio

Engineered for performance using the highest quality materials and construction.

Vina Camera Image Slider support unlimited image. Very easy to add new, remove and order image.

Gladen Audio

Official Gladen Audio product dealer

Taramp's Amplifiers

VM - Shopping cart

 x 

Cart empty
×

Warning

Assign the component VirtueMart to a menu item
  • 862 times

 

Amplifiers 1ch - Ενισχυτες 1κανάλι

 Audison SR-1D

Τιμή : 297 €

SR 1D is a compact mono digital amplifier.
With a full configurable by-pass crossover and PRE OUT coming from the hi-level speaker inputs, it is perfect to drive a subwoofer in an OEM factory upgraded system.

 

Power Output (Rms)

Load Imp. Mono
4 Ω 280 W x 1
2 Ω 460 W x 1
1 Ω 640 W x 1

Audison SR-1DK

Τιμή : 436 €

SR 1Dk is a powerful mono Digital amplifier representing maximum expandability in terms of power and configuration capability.
Featuring a PRE OUT recreated from the hi-level speakers inputs and by-passable full configurable crossover along with its abillity to operate in "cascade" mode linking many amplifiers together, its extreme versatility makes it a premium product.

 

 

Power Output (Rms)

Load Imp. Mono
4 Ω 600 W x 1
4/2 Ω 1800 W x 1
2 Ω 940 W x 1
1 Ω 1200 W x 1
(Amp Chain) 2 Ω 2400 W

Audison AP-1D

Τιμή : 299 €

The AP1 D amplifier was designed to drive a subwoofer and is the ideal extension of the AP8.9 bit and AP4.9 bit. At 2 Ohms it is stable and can supply 540 W power with extremely compact dimension. With the APTK 3 (Audison Prima Tower Kit 3) staking system it’s possible to stack the AP1 D and save space without any problem of overheating.

Power Output (Rms)

Load. Imp. Mono
4 Ohm 310 W
2 Ohm 540 W

Audison Voce Mono - AV Uno

Τιμή : 891 €

AV uno is an amplifier featuring an innovative circuitry called POD (Power On Demand); it provides at the final stage in AB class a dynamic power that serves as a tracker to the signal to be amplified so as to increase efficiency and reduce the temperature.
AV uno allows to combine the plus points, in terms of audio quality and robustness, of the AB Class traditional amplifiers with the efficiency of the D Class amplifiers. AMP (Amplifier Management Processor) constantly checks the operating status system and communicates with the user through 4 different coloured LEDs, located on the top panel; ART (Automatic Remote Turn On-Off) allows automatic turn-on/off when a remote signal isn’t available from the source.
AV uno is a mono amplifier designed to drive the subwoofer but also suitable for high power Dual Mono systems.

 

Power Output (Rms)

Load Imp. Mono
4 Ohm 700 W x 1
2 Ohm 1300 W x 1
1 Ohm 1700 W x 1

Audison Thesis Mono - TH Uno

Τιμή : 2550 €

The Thesis TH amplifiers are manufactured using state-of-the-art analog and digital technology. Class A amplification stage, multi-standard analog and digital inputs and the control of the amplifier through a microprocessor make this product the most evolved among the Audison range.
TH uno is a single channel (mono) amplifier used to achieve maximum performance under any load; capable of delivering up to 2300 W into 1 Ohm and 200 W in the audiophile A Class mode. Specifically designed to drive systems and subwoofers with self-assured mastery.

Power Output (Rms)

  Load Imp. Mono
Dual Power - Hi-Current 4 Ohm 850 W x 1
  2 Ohm 1500 W x 1
  1 Ohm 2300 W x 1
Dual Power - A Class 4 Ohm 200 W x 1
Amp Chain 2 Ohm (2 Amp) 4500 W x 1

Hertz HCP 1D

Τιμή : 247 €

HCP 1D is a mono D Class car audio amplifier , with an incredibly minimized size heat sink. All the Hertz Compact Power amplifiers are assembled with high-quality components and feature a complete and by-passable crossover system. The dissipation system is optimized with the heat being transferred to the heat sink and then dissipated through the sides of the amplifier. HCP 1D has been designed to work in multiple configurations. More specifically, it features Hi-Pass pre-amplified outputs, providing the ability to create a Band-Pass on the front woofer. Besides, using the HRC accessory (Hertz Remote Control), the subwoofer volume can be remote controlled with extreme preciseness.

Power Output (Rms)

Load Imp. Mono
4 Ohm 380 W x 1
2 Ohm 700 W x 1

Data table

Channel mode 1
Output Power (RMS)
@ 14.4 VDC
1 Ch: 380 W x 1 (4 Ω)
1 Ch: 700 W x 1 (2 Ω)
Filters
Bypass
Hi-Pass
Lo-Pass
Band-Pass
Subsonic

Yes
-
50 ÷ 250 Hz @ 24 dB/Oct.
-
25 Hz @ 24 dB/Oct.
Distortion - THD
(100Hz @ 4Ω)
0.2%
S/N Ratio
(A weighted @ 1V)
100 dB
Damping factor
(100Hz @ 4Ω)
80
Size W x D x H
mm (in.)
215 x 190 x 50 (8.46 x 7.48 x 1.97)
- See more at: http://www.hertzaudiovideo.com/car-audio-amplifier-hcp1d/#sthash.FKlE2R9n.dpuf

Data table

Channel mode 1
Output Power (RMS)
@ 14.4 VDC
1 Ch: 380 W x 1 (4 Ω)
1 Ch: 700 W x 1 (2 Ω)
Filters
Bypass
Hi-Pass
Lo-Pass
Band-Pass
Subsonic

Yes
-
50 ÷ 250 Hz @ 24 dB/Oct.
-
25 Hz @ 24 dB/Oct.
Distortion - THD
(100Hz @ 4Ω)
0.2%
S/N Ratio
(A weighted @ 1V)
100 dB
Damping factor
(100Hz @ 4Ω)
80
Size W x D x H
mm (in.)
215 x 190 x 50 (8.46 x 7.48 x 1.97)
- See more at: http://www.hertzaudiovideo.com/car-audio-amplifier-hcp1d/#sthash.FKlE2R9n.dpuf
HCP 1D is a mono D Class car audio amplifier , with an incredibly minimized size heat sink. All the Hertz Compact Power amplifiers are assembled with high-quality components and feature a complete and by-passable crossover system. The dissipation system is optimized with the heat being transferred to the heat sink and then dissipated through the sides of the amplifier.
HCP 1D has been designed to work in multiple configurations. More specifically, it features Hi-Pass pre-amplified outputs, providing the ability to create a Band-Pass on the front woofer. Besides, using the HRC accessory (Hertz Remote Control), the subwoofer volume can be remote controlled with extreme preciseness. - See more at: http://www.hertzaudiovideo.com/car-audio-amplifier-hcp1d/#sthash.FKlE2R9n.dpuf

Hertz HCP 1DK

Τιμή : 396 €

HCP 1DK is a mono car audio amplifier with an incredibly minimized size heat sink. All the Hertz Compact Power amplifiers are assembled with high-quality components and feature a complete and by-passable crossover system. The dissipation system is optimized with the heat being transferred to the heat sink and then dissipated through the sides of the amplifier. HCP 1DK has been designed to work in multiple configurations. More specifically, it features Hi-Pass pre-amplified outputs, providing the ability to create a Band-Pass on the front woofer. Besides, using the HRC accessory (Hertz Remote Control), the subwoofer volume can be remote controlled with extreme preciseness.

Power Output (Rms)

Load Imp. Mono
4 Ohm 740 W x 1
2 Ohm 1240 W x 1

Hertz HDP 1

Τιμή : 355 €

 

HDP 1 is a mono D-Class car audio amplifiers providing very high power and efficiency, being able to astonish for the excellent musicality. HDP 1 is ideal to drive subwoofers and can work on 2 Ohm and 4 Ohm loads, providing 600W and 1000W power. HDP 1 features a subsonic and a Lo-Pass filer, both at 24 dB/Oct. Maximum installation versatility: just like the whole HDP line, the mono is equipped with the HDP IN system which, through the Speaker In and RCA inputs, provides the ability to interface with any OEM and aftermarket source.

Power Output (Rms)

Load Imp. Mono
4 Ohm 600 W x 1
2 Ohm 1000 W x 1

Hertz HP 3001 - SPL Show

Τιμή : 695 €

HP 3001 is a D Class mono spl car audio amplifier, able to provide 6000W power for the subwoofer, and ensuring terrific performance if two of these amps are used to drive the front woofers (up to 500 Hz). The design of the printed circuit boards, the components featured on the output stage have been designed to comply with strict requirements of reliability, power and thermal dissipation. The wide array of possible setups, with by-passable Lo-Pass filter (24 dB/Oct. slope), subsonic filter, phase control and remote volume control, provides the ability to set HP 3001 in different systems; also, thanks to a Chain Mode function to cascade a second amplifier into a single load, 7200W power can be achieved with very high SPL levels.

Power Output (Rms)

Load Imp. Mono
4 Ohm 1440 W x 1
2 Ohm 2400 W x 1
1 Ohm 3600 W x 1
HP 3001 is a D Class mono spl car audio amplifier, able to provide 6000W power for the subwoofer, and ensuring terrific performance if two of these amps are used to drive the front woofers (up to 500 Hz).
The design of the printed circuit boards, the components featured on the output stage have been designed to comply with strict requirements of reliability, power and thermal dissipation.
The wide array of possible setups, with by-passable Lo-Pass filter (24 dB/Oct. slope), subsonic filter, phase control and remote volume control, provides the ability to set HP 3001 in different systems; also, thanks to a Chain Mode function to cascade a second amplifier into a single load, 7200W power can be achieved with very high SPL levels. - See more at: http://www.hertzaudiovideo.com/spl-car-audio-amplifier-hp3001/#sthash.P0AD2xci.dpuf

 

Hertz HP 3001 - SPL Show

Τιμή : 995 €

HP 6001 is the most powerful spl car audio amplifier within the SPL Show line. The overbuilt power supply stage and the D Class output stage featuring 12 Mosfets provide the ability to deliver up to 6000W power. The wide array of possible setups, with by-passable Lo-Pass filter (24 dB/Oct. slope), subsonic filter, phase control and remote volume control, make HP 6001 an extremely powerful amplifier, perfect for SPL applications. Thanks to the Chain Mode function, to cascade a second amplifier into a single load, a devastating amount of power up to 12000W can be achieved with record SPL levels.

Power Output (Rms)

Load Imp. Mono
4 Ohm 2150 W x 1
2 Ohm 3760 W x 1
1 Ohm 6000 W x 1

Hertz Mp 15K Unlimited

Τιμή : 1998 €

The Hertz MP 15K UNLIMITED spl car audio amplifier can deliver over 15.000 W. The enormity of this project amazes; both in terms of the physical “size” of the product itself and of the sheer energy it generates.

The power supply stage features 8 toroidal transformers and the output stage, settable in bridged or stereo mode, features 20 -190A/360V impulsive current Mosfets: solid, robust power and thermal dissipation without compromise. Direct Current® , the power supply connection system, transfers power between the battery and amplifier with very low contact resistance, to achieve the current transfer required for high SPL systems.

The Hertz SPL Stack System® provides the ability to stack multiple MP 15K UNLIMITED amplifiers, using 6 robust iron Brackets. With the Hertz SPL Stack System® your system can deliver 15.000 W, 30.000 W, 45.000 W, or more, just stack and connect!

Power Output (Rms)

Load Imp. Mono
4 Ohm 5600 W x 1
2 Ohm 9000 W x 1
1 Ohm 12000 W x 1